Automotive / Transportation, Appliances, Housings for Shavers, Vacuum Cleaners etc, Refridgerator Liners, Medical Items, Compressors and Gardening.


Quote Now

Click here to request a detailed quote

  • Sizes/ Uses/ Properties
  • Technical and Other Data
  • Colour Information

Product Availability

Max Sizes (NB: We cut to size from these)
Price Guide per Square Metre (Material Cost Only)
Sheets See below
1mm to 13mm
2500mm by 1250mm Please ask.

To see availability chart - Click here.

Key Properties

A hard thermoplastic. Tough (maintains impact resistance at low temperatures). Easily processed & may be electroplated. Easily bonded. Good gloss surface finish. Used in preference to PVC for high (50°-70°C) or low (less than –20°C.)


  • High rigidity.
  • Good impact resistance, even at low temperatures.
  • Easily processed (may be electroplated).
  • Good insulating properties.
  • Good weldability.
  • Good abrasion and stain resistance.
  • High dimensional stability (low water absorption).
  • Good paintability and platability.


  • Poor weathering resistance.
  • Ordinary grades burn easily and continue to burn once the flame is removed.
  • Scratches easily.
  • Poor solvent resistance, particularly aromatic, ketones and esters.
  • Can suffer from stress cracking in the presence of some greases.

Chemical Name

Acrylonitrile Butadiene Styrene


Insulation, Stain Resistance, Paintability, Platability, Impact Resistance.

Additional Information

ABS - (full name Acrylonitrile Butadiene Styrene)

Density g/cm^3
Shrinkage %
UV Resistance
Transparency (% visible light transmission) %
H2O Absorption After 24 hours %
Maximum Continuous Working Temperature (Zero Tensile effect after 11 years)






Low °C

High °C


0.7 to 1.6

Poor but UV Grades available

No clear grade

0.05 to 1.8



Hardness by shore D  in Mpa

Tensile strength at break in Mpa

Elongation at break %

Flexural modulas Gpa

Toughness by notched izod impact (at room temp –
J / m

Fire resistance loss on ignition %

Dielectric Strength (Insulation Value) KV/mm thickness


29 to 43

10 to 50

1.6 to 2.4

200 to 215










Manufacturing tolerances

Range 1 – 3mm


Range 3 - 5mm


Range 5- 6mm



+/- 0.10mm


+/- 0.15mm


+/- 0.20mm



+/- 5.00mm


+/- 5.00mm


+/- 5.00mm



+/- 3.00mm


+/- 3.00mm


+/- 3.00mm


Due to its hygroscopic nature ABS may require drying before processing. Dry at around 70 oc for about 75 minutes per mm thickness to prevent blisters when thermoformed.

ABS - Colours

The colours shown represent the closest match we can show on a website. They are not exact as lighting, reprographic methods and different producers cause considerable variation. If you want an exact match please send us a sample or colour reference number from the Pantone of RAL charts. If you need assistance with this please click here.

Please remember that not all colours are available in all thicknesses. Please ask us for current stock avaiability. Stocks cannot be reserved until they are paid for and the order placed on the factory.


ABS- Gloss, Matt, Economy Black White & Flame retardant & Conductive grades

ABS in Pinseal Black

ABS - Metallic Flake Silvery Grey A1

ABS - Carbon Black effect - A2



« Back to previous page | Back to top of page ^^

Acrylic (Perspex™) Sheet.
Acrylic Rods, Tubes & Fluorescent Colours.
Acrylic globes, domes, spheres, hemi-spheres & balls.
Acrylic blocks.
Acrylic display panels & support mounts.
Acrylic mounting blocks.
Acrylic blocks joined with magnets.
Multi wall Polycarbonate.
Foamed PVC panels.
Forex Smart & Foam X mounting sheets.
Polycarbonate sheets, rods, tubes.
Polycarbonate globes.
ABS sheets.
Aluminium Composite sheets.

PETG, APET, (Polyester) sheets.
Polyamide (Nylon) sheets & rods.  

Polyethylene (HDPE) sheets.
EcoPanels (Recycled LD Polyethylene) Low cost thick sheets.
Polypropylene sheets - over 2mm thick.
Polypropylene sheets - under 1.2mm thick.
Polystyrene (HIPS) including multi-colour thin sheets.
Polysulphone, PEI, PEEK sheets.
PVC Solid sheets. (Cladding etc) 2mm to 12mm.
PVC Low Density Rigid Foam sheets.
PVC Forex Smart & Foam X sheets.
PVC Thin Flexible sheets from 0.140mm to 2mm.
Thin Plastic sheets - Polypropylene, PVC.
UHMWPE Polyethylene 1000.
Globes, Domes, Balls, Hemi-spheres.


Terms of Business
Privacy Policy
Copyright © 2024 eSheet Ltd.
Registered in England & Wales, No. 8088486


Saturday 22nd of June 2024