PET(G) Sheet

Applications

Its about the same price as Acrylic but is almost as strong as Polycarbonate! USe for Point of Sale displays. Medical, pharmaceutical, food-contact, personal care and electrical transparent applications.

 

 

Quote Now

Click here to request a detailed quote

  • Sizes/ Uses/ Properties
  • Technical and Other Data
  • Colour Information
Shapes
Colours
Thickness (mm)
Max Sizes (NB: We cut to size from these)
Price Guide per Square Metre (Material Cost Only)
Sheets Clear 1.5, 2, 3, 4, 5, 6, 8, 10 3m x 2m 1.5mm c£14 to 10mm £40

Key Properties

Cheaper than Polycarbonate with 80% of impact resistance. Similarly low wear resistance and toughness as Nylon. Dimensional stability and minimal creep of ACETAL. Low friction. Low moisture absorption. Can be used with foodstuffs.

Strengths

  • High mechanical properites (stiffness, hardness and toughness)
  • Broad range of use temperature (from -40 to 130°C)
  • High resistance to creep and fatigue
  • Low coefficient of friction
  • High wear resistance
  • Good insulating properties
  • Low water absorption
  • Good chemical resistance, in particular with oils and lubricants
  • Optical transparency
  • Easy to fabricate
  • Ability to be sterilized
  • FDA compliant
  • Easy to form

Limits

  • High shrinkage (~2%), due to its high crystallinity
  • Attacked by oxidizing or strong acids and strong bases
  • Low resistance to UV and gamma radiation
  • Flammable, releases some formaldehyde (highly odourous)
  • Opaque
  • Cannot be used above 60 - 66°C

Chemical Name

Thermoplastic Polyester
Polyethylene Terephthalate Glycol

Keywords

Good Insulation, High Wear Resistance, FDA Compliant.

Additional Information

PET(G) Sheet (Thermoplastic Polyester)

Density g/cm^3
Shrinkage %
UV Resistance
Transparency (% visible light transmission) %
H2O Absorption After 24 hours %
Maximum Continuous Working Temperature (Zero Tensile effect after 11 years)
Low °C
High °C
1.27
0.2 to 1
Fair
88 to 91
0.1 to 0.2
-40
+65  
Hardness Shore D Mpa
Tensile Strength at Break Mpa
Elongation at Break %
Flexural Modulas Gpa
Toughness by Notched IZOD Impact at Room Temperature J/m
Fire Resistance LOI %
Dielectric Strength (Insulation Value) KV/mm thickness
55
40
50
2.2
2 to 35
24
70+  

PETG & APET - Colours

Colours

PET(G) is current available in clear only.

Some thinner thicknesses of the sister polymer APET are available in an "Anti-Reflective" finish which is also called "Anti-Glare".

 

 

« Back to previous page | Back to top of page ^^


PRODUCTS:
Acrylic (Perspex™) Sheet.
Acrylic Rods, Tubes & Fluorescent Colours.
Acrylic globes, domes, spheres, hemi-spheres & balls.
Acrylic blocks.
Acrylic display panels & support mounts.
Acrylic mounting blocks.
Acrylic blocks joined with magnets.
Multi wall Polycarbonate.
Foamed PVC panels.
Forex Smart & Foam X mounting sheets.
Polycarbonate sheets, rods, tubes.
Polycarbonate globes.
ABS sheets.
Aluminium Composite sheets.

PETG, APET, (Polyester) sheets.
Polyamide (Nylon) sheets & rods.  

Polyethylene (HDPE) sheets.
EcoPanels (Recycled LD Polyethylene) Low cost thick sheets.
Polypropylene sheets - over 2mm thick.
Polypropylene sheets - under 1.2mm thick.
Polystyrene (HIPS) including multi-colour thin sheets.
Polysulphone, PEI, PEEK sheets.
PVC Solid sheets. (Cladding etc) 2mm to 12mm.
PVC Low Density Rigid Foam sheets.
PVC Forex Smart & Foam X sheets.
PVC Thin Flexible sheets from 0.140mm to 2mm.
Thin Plastic sheets - Polypropylene, PVC.
UHMWPE Polyethylene 1000.
Globes, Domes, Balls, Hemi-spheres.

 

Terms of Business
Privacy Policy
Copyright © 2024 eSheet Ltd.
Registered in England & Wales, No. 8088486

www.esheet.co.uk

Saturday 14th of December 2024